SOFTWARE CATEGORIES  
 
 
 
 
 
 
 
 
 
 
 
ADVERTISING  


Advertising


RAID Reconstructor 2.31
Editor's rating Type Shareware
Average user rating
(Rating: 0 / 0 votes)
Limitations registration screen appears after 21 days, program continues to function
Downloads 2 Requirements 32 MB RAM, Disk controller card capable of handling all the drives in your RAID
Publisher (Home Page) Runtime Software File size 1949 K
Product Page Runtime Software Prim. download
Released 2003-12-13 Sec. download
Price $99.00 US
Program Languages English Op. systems Win Win95,Win98,WinME,WinNT 3.x,WinNT 4.x,Windows2000,WinXP
Id 20786 ASP MEMBER
Publisher information

Data Recovery for RAID Arrays

Recover Data From A Broken RAID Level 5 or 0 Array

Recover data from a broken RAID Level 5 or RAID Level 0 Array. Even if you do not know the RAID parameters, such as drive order and block size, RAID Reconstructor will analyze your drives and determine the correct values.

Recover data from a broken RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.

Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical drive.

Once you created an image you can use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it.

RAID Reconstructor is read-only. It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".

Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.

The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.

Publisher: http://www.runtime.org
Product: http://www.runtime.org
Keywords: [caribooplanet] data recovery, raid recovery, raid reconstuction, restore raid level 5 array, broken raid, recover, files, drive, NTFS, deleted,
Category: System Utilities::Backup & Restore
Reciprourl: http://

 
 


 

Copyright 2006-2010 caribooplanet.com, LTI Ltd. All rights reserved.